Disco
dad3240-dicing-saw
Wafer size
200mm
Optics
SDE03 engine with λ = 1342 nm[1]
What is it?
What can it run?
Process applications and technology nodes documented for this tool.
- Dicing silicon wafers
What do the numbers mean?
Wafer handling1
Optics & imaging1
Configuration & options5
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What material is this dicer intended for?
It is dedicated to dicing silicon wafers only.[1]
What is the maximum wafer or sample size it handles?
The maximum sample diameter is 200 mm.[1]
Can it dice from the backside?
Yes. Backside dicing through tape is possible.[1]
What wafer surface conditions are required in the dicing streets?
The dicing streets must be smooth and mirror polished where the laser is incident, and the street area must be metal-free within a width of 0.4 times the substrate thickness centered on the dicing street.[1]
What silicon resistivity is required?
Silicon resistivity must be greater than 0.01 ohm-centimeter.[1]
Not publicly documented
The following facts about the dad3240-dicing-saw are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the dad3240-dicing-saw are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the dad3240-dicing-saw are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the dad3240-dicing-saw are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the dad3240-dicing-saw are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the dad3240-dicing-saw is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]confluence.nanofab.ualberta.ca — confluence.nanofab.ualberta.caconfluence.nanofab.ualberta.ca
Last updated Jul 29, 2026.
Compare with similar tools
View all →The EV Group 850 LT SOI Fusion Wafer Bonder is a fully automatic wafer bonder configured for 8-inch/200mm wafers.
The Disco DFL7340 stealth dicing system is used for dicing silicon wafers and is dedicated to Si wafers only.
The EVG Gemini Automated Production Wafer Bonder is a wafer bonder with face-to-face alignment and automation features, supporting wafers up to 8"/200mm.
The SUSS MicroTec SB6 / 8 Gen2 is a semi-automated wafer bonding system capable of handling wafers up to 200 mm.
