Semitool

The Semitool ST 260 SRD is a spin rinse dryer designed for processing 2-inch wafers.

The Semitool SSTC 421270 is a wet glue remover used in semiconductor manufacturing.

The Semitool Equinox Spray Liftoff System is a six-head spray liftoff system with vintage years of 2008 and 2010.

The Semitool ST 270 SRD is a spin rinse dryer configured for 4-inch wafers.

Semitool SST 221 280 Spray Solvent is a Semitool tool identified by model SST 221 280.

The Semitool SST C 421 280 is a batch wafer processing system offered in configurations for 6-inch and 8-inch wafers.

The Semitool 280 SRD is a spin rinse dryer system for semiconductor manufacturing.

The Semitool WSST 608 AG is a wet processing tool for 6-inch wafers.

The Semitool 870 F is a Dual Stack spin rinse dryer (SRD) manufactured by Semitool.

The Semitool ST 860 (also designated ST-860) is a spin rinse dryer (SRD) used for processing wafers of sizes 2, 3, 4 inch, and available in a double stack configuration handling wafers up to 125 mm.

The Semitool A 870 S is a centrifugal dryer.

The Semitool 4300 S SRD is a spin rinse dryer with a single-stack configuration and 200mm wafer particle specification.

The Semitool 270 S 6 1 E ML SRD is a Spin Rinse Dryer (SRD) designed for 6 inch wafers.

The Semitool Storm II Box is a box washer for 200 mm (8 inch) wafers, with units reported from 1996 and 2005 vintages.

The Semitool SST C 642 250 is a batch wafer processing system specified for 8-inch wafers.

The Semitool Equinox Semiconductor Wafer Electroplating System is a single-head manual plater with one 100mm process head and one 100mm SRD.

The Semitool Raider ECD 310 is a plating system designed for wafer fabrication, supporting 12-inch wafers, with a known vintage of 2009.

Semitool R 208 FMC 2 is a single-wafer system configured for DHF, NH4OH, H2O2, H2SO4, and IPA.

Semitool EO 222 SR is a wet etcher for semiconductor manufacturing.

Semitool Symphony 2300 Spray Acid is a 1-chamber equipment item identified by model name Symphony 2300.

Semitool Raider ECD 312 is an electroplating system described with 3-phase 50/60 Hz 380 V power and FOUP loadport handling.

The Semitool Raider ECD Electroplating System is an electrochemical deposition tool for 300 mm wafers, requiring 3-phase 208 V, 5-wire, 50/60 Hz, 125 amp power.

The Semitool WST 305 M is a spin dryer.

The Semitool P 87 FR 11 SRD is a spin rinse dryer used in semiconductor manufacturing.

The Semitool SST 201 SRD is a spin rinse dryer designed for 8-inch wafers with a single chamber configuration.

The Semitool SAT 2060 DOA 2 PCCE is a wet glue remover manufactured by Semitool.

The Semitool 421 Scepter Spray Solvent Tool (SST) is a single-chamber batch solvent processor for wafer cleaning that processes up to 50 wafers.

The Semitool 11600 SRD is a spin rinse dryer manufactured by Semitool.

The Semitool 870 is a spin rinser/dryer that rinses substrates in DI water to 15 MΩ and dries them with heated nitrogen.

Semitool SST C 742 280 Spray Solvent System with SMIF loader, carrier loader, DIW pump, chemical supply unit, CTR unit, base plate, and cabinets.

The Semitool SAT 20605 Wet Glue Remover is a wet bench tool designed for removing glue from substrates in semiconductor manufacturing.

The Semitool 421 Spray Solvent Tool (SST) is a batch solvent processor for wafer cleaning with an 8-inch/200mm maximum wafer size.

The Semitool 270 is a spin rinser/dryer for 3", 4", and 6" wafer boats.

The Semitool 880 is a spin rinser/dryer that rinses masks and wafers in DI water to 15 MΩ and dries them with heated nitrogen.

The Semitool SSTC 74227 OP Wet Glue Remover is a wet glue remover.

The Semitool 270 S SRD is a spin rinse dryer manufactured by Semitool.