Tenney

BTC Temperature

Research Quality: 40% complete

The Tenney BTC Temperature is a temperature chamber. The Tenney BTC Temperature has a temperature range of -70°C to +200°C. The Tenney BTC Temperature has inside dimensions of 20" L x 19" W x 22" H.^[1]^[2]

BTC Temperature — Inventory photo — Fig. 01BTC TemperatureInventory photo^[1]

How it works

The BTC uses a recirculating air stream to help maintain uniform conditions in the workspace.^[4]^[3]

What do the numbers mean?

Power & electrical2

Voltage: 230V, 1 Ph, 60 Hz, 23A^[1]
Power: 230V, 1 Ph, 60 Hz, 23A^[1]

Control & software2

Temperature control: ±1.0°C after stabilization^[3]
Humidity control: N/A or ±5% RH after stabilization, depending on model^[3]

Dimensions & facilities2

Inside Dimensions: 20” L x 19” W x 22” H^[1]
Inside dimensions: 20 in L x 19 in W x 22 in H^[1]

Configuration & options11

Temperature range: -70°C to +200°C^[1]; 2” Cable port^[1]
Model: BTC^[1]
Cable port: 2"^[1]
Product type: Temperature chamber^[1]
Line: Benchmaster temperature and humidity test chambers^[3]
Internal workspace: 5 cubic feet^[3]
Air flow rate: 115 CFM^[3]
Heat capacity: 2000 W^[3]
Refrigeration: Two 1 HP reciprocating compressors^[3]
Standard port: 3-inch port on left side^[3]

Vintage & configurations

Documented models & variants

Designation	Generation	Vintage	Changes	Source
BTC	—	—	—	tenney.com^[3]
BTRC	—	—	—	tenney.com^[3]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Voltage230V, 1 Ph, 60 Hz, 23A^[1]
Power230V, 1 Ph, 60 Hz, 23A^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What type of controller does the Tenney BTC have?

The Tenney BTC uses a Watlow F4T profiling type dual channel 1/4 DIN controller for temperature control.^[3]

Not publicly documented

The following facts about the BTC Temperature are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the BTC Temperature are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the BTC Temperature are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the BTC Temperature are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the BTC Temperature is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the BTC Temperature are on record.
Answerable by: an OEM parts catalog or a service engineer

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (4)Every fact above is drawn from these public sources

[1]Inventory photo
[2]BTC Temperature — Tenney | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
[3]tenney.com — tenney.comtenney.com
[4]Atec Tenney-BTC-BTRC User Manual | 2 pages — manualsdir.commanualsdir.com