Sumitomo
SE 75 DU Injection
What it is
General reference — not yet source-verifiedInjection molding machines are material-forming systems used to produce repeatable plastic parts from thermoplastic feedstock. In packaging and bonding contexts, such machines are part of the broader equipment class used to create molded components that support assembly, protection, sealing, or mechanical interface functions.
Machines of this class combine material heating, plasticizing, metering, and controlled injection into a mold cavity. The formed part is then cooled and ejected, after which the cycle repeats under tightly controlled process conditions.
How it works
General reference — not yet source-verifiedA machine of this class feeds polymer pellets into a heated barrel where the material is melted and homogenized by a rotating screw or similar plasticizing element. The machine then meters a shot of molten material and drives it into a closed mold under pressure so the cavity fills and the part takes shape.
After filling, the material is held under pressure as it cools and solidifies. The mold opens, the part is removed or ejected, and the cycle repeats. Process control focuses on melt condition, injection behavior, mold temperature, and repeatability of part geometry.
What do the numbers mean?
Power & electrical6
Configuration & options6
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the SE 75 DU Injection are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SE 75 DU Injection are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the SE 75 DU Injection are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the SE 75 DU Injection are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the SE 75 DU Injection are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the SE 75 DU Injection is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]Inventory photo
- [4]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 7, 2026.
Compare with similar tools
View all →
Applied Materials model 0010-47763 is an ASSY ESC Bonded Monopolar Dual Heated unit.
The Applied Materials 0041-26723 is a bonded assembly used in semiconductor packaging and bonding applications.
The Logitech 1 WBS 1 is a wafer substrate bonder for 6-inch wafers.
