Strasbaugh

6 Y 2

CMP Strasbaugh 6 Y 2 family

Research Quality: 40% complete

LinkedIn X Email

Strasbaugh6 Y 2

No photo available yet

What it is

The Strasbaugh 6 Y 2 is a CMP polisher.^[2]^[3]

The Strasbaugh 6 Y 2 has two stations and a 16 inch capacity.^[1]^[2]^[3]

How it works

The Strasbaugh 6 Y 2 has variable-speed spindle and overarm controls.^[2]^[3]

The Strasbaugh 6 Y 2 uses round aluminum pans and a 3/4 HP variable speed pulley drive.^[1]^[2]

Where it fits in the process flow

General reference — not yet source-verified

CMP polishers sit in the surface-finishing stage of semiconductor processing.

CMP tools are used after earlier patterning or deposition steps when planarization or surface conditioning is needed before later process steps.

Applications

The Strasbaugh 6 Y 2 has 220V, single-phase, 12 amp electrical requirements.^[1]^[2]

What do the numbers mean?

Power & electrical2

Voltage: 220V, 1 PH, 12 amp^[1]
Electrical requirements: 220V, 1 PH, 12 amp^[1]

Configuration & options15

2 Stations^[1]; 16 inch capacity^[1]; 0-100 RPM Spindle^[1]; 0-100 RPM Overarm^[1]; 3/4 HP Variable Speed Pulley Drive^[1]; Round Aluminum Pans^[1]; Refurbished^[1]
Category: CMP^[2]
Tool type: Polisher^[1]
Stations: 2^[1]
Capacity: 16 inch^[1]
Spindle speed: 0-100 RPM^[1]
Overarm speed: 0-100 RPM^[1]
Drive: 3/4 HP Variable Speed Pulley Drive^[1]
Pans: Round Aluminum Pans^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Voltage220V, 1 PH, 12 amp^[1]
Electrical requirements220V, 1 PH, 12 amp^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

How many stations does the Strasbaugh 6 Y 2 have?

The Strasbaugh 6 Y 2 has 2 stations.^[1]^[2]^[3]

What is the capacity of the Strasbaugh 6 Y 2?

The Strasbaugh 6 Y 2 has 16 inch capacity.^[1]^[2]^[3]

What spindle speed range is given for the Strasbaugh 6 Y 2?

The Strasbaugh 6 Y 2 has a 0-100 RPM spindle.^[1]^[2]

What overarm speed range is given for the Strasbaugh 6 Y 2?

The Strasbaugh 6 Y 2 has a 0-100 RPM overarm.^[1]^[2]

What electrical requirement is given for the Strasbaugh 6 Y 2?

The Strasbaugh 6 Y 2 requires 220V, single-phase power at 12 amp.^[1]^[2]

Not publicly documented

The following facts about the 6 Y 2 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 6 Y 2 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 6 Y 2 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 6 Y 2 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 6 Y 2 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 6 Y 2 is not on record.
Answerable by: an OEM datasheet or a fab qualification report