Waferpedia

Siemens

Siplace HS 60

Assembly / SMTSiemens Siplace HS 60 family
Research Quality: 50% complete
LinkedIn X Email

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Siemens Siplace HS 60 is a pick-and-place machine. The Siemens Siplace HS 60 is configured with 4 x DLM2 gantries and 4 changeover tables. The Siemens Siplace HS 60 is classified as Assembly / SMT.[1][2][3]

Siplace HS 60 — Inventory photo
Fig. 01Siplace HS 60Inventory photo[1]

Power

4 kW[4]

Performance

80/75 μm (4 sigma)[4]

What it is

The Siemens Siplace HS 60 is an assembly and surface-mount technology pick-and-place machine.[2][3]

How it works

The Siemens Siplace HS 60 uses four DLM2 gantries and changeover tables to support component placement in an SMT assembly flow.[1][2][3]

The Siemens Siplace HS 60 is specified with a 12-nozzle collect-and-place head.[4][6][5]

Where it fits in the process flow

The Siemens Siplace HS 60 is used to place components onto printed circuit boards in SMT assembly lines.[2][3]

Applications

The Siemens Siplace HS 60 is used for surface-mount electronic component placement on printed circuit boards.[2]

The Siemens Siplace HS 60 is specified with a component range from 0.6 by 0.3 millimeter parts marked as 0201 up to 18.7 by 18.7 millimeter parts.[4][6][5]

What do the numbers mean?

Power & electrical1

Power
4 kW[4]
Accurate?

Performance1

Maximum placement accuracy
80/75 μm (4 sigma)[4]
Accurate?

Control & software1

Operating system
Microsoft Windows / RMOS[4]
Accurate?

Dimensions & facilities2

PCB dimensions, single conveyor
50 mm x 50 mm to 368 mm x 216 mm[5]
Accurate?
PCB dimensions, dual conveyor
50 mm x 50 mm to 368 mm x 460 mm[5]
Accurate?

Configuration & options8

4 x DLM2 gantries[1]
Accurate?
Including 4 changeover tables[1]
Accurate?
Machine type
pick-and-place machine[1]
Accurate?
Changeover tables
4 changeover tables[1]
Accurate?
Placement speed
60,000 cph[4]
Accurate?
Component range
0.6 mm x 0.3 mm (0201) to 18.7 mm x 18.7 mm[4]
Accurate?
Feeding capacity
144 tracks, 8 mm tape[5]
Accurate?
Compressed air requirements
5.5-10 bar, 950 Nl/min, pipe diameter 3/4[4]
Accurate?
Interested in this tool?
Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What type of equipment is the Siemens Siplace HS 60?

The Siemens Siplace HS 60 is a pick-and-place machine for assembly and SMT work.[2]

What placement rate is specified for the Siemens Siplace HS 60?

The Siemens Siplace HS 60 has a benchmark placement rate of 60,000 cph.[4][6][5]

What component size range is specified for the Siemens Siplace HS 60?

The Siemens Siplace HS 60 is specified for components from 0201 size parts at 0.6 by 0.3 millimeter up to 18.7 by 18.7 millimeter parts.[4][6][5]

Not publicly documented

The following facts about the Siplace HS 60 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Siplace HS 60 are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the Siplace HS 60 are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the Siplace HS 60 are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the Siplace HS 60 are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the Siplace HS 60 is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (6)Every fact above is drawn from these public sources
  1. [1]Inventory photo
  2. [2]Siplace HS 60 — Siemens | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
  3. [3]Siemens Siplace HS 60 family | Waferpedia — waferpedia.comwaferpedia.com
  4. [4]efsmt.com — efsmt.comefsmt.com
  5. [5]vitapcb.com — vitapcb.comvitapcb.com
  6. [6]Siemens Siplace HS60 Pick and place machine — qismt.comqismt.com
Was this page accurate?

Last updated Oct 11, 2026.

Compare with similar tools

View all →
0020 54137 PartApplied Materials
CategoryAssembly / SMT
1 spec
Siplace HS 60 vs 0020 54137 Part →
03 iX AutomaticDek

The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.

CategoryAssembly / SMT
1 spec
Siplace HS 60 vs 03 iX Automatic →
1707 EXL Reflow SolderingHeller
CategoryAssembly / SMT
20 specs
Siplace HS 60 vs 1707 EXL Reflow Soldering →
2014-09-11T12Koh Young

General referenceThe Koh Young 2014-09-11T12 is an automated optical inspection machine used in surface-mount technology assembly lines to verify the quality of solder joints and component placement.

CategoryAssembly / SMT
1 spec
Siplace HS 60 vs 2014-09-11T12 →
2060Juki
CategoryAssembly / SMT
Siplace HS 60 vs 2060 →
2060 Pick and Place PartsJuki
CategoryAssembly / SMT
1 spec
Siplace HS 60 vs 2060 Pick and Place Parts →