Nutek
NTM MGL 1000 Gate
The Nutek NTM MGL 1000 Gate is Assembly / SMT equipment. The Nutek NTM MGL 1000 Gate has a 100 cm gate. The Nutek NTM MGL 1000 Gate uses 230 VAC power, 2-4 Bar pressure, and Phase 1.[1][2]
What it is
General reference — not yet source-verifiedAssembly and surface-mount technology equipment is used on electronics production lines for handling, interconnecting, inspecting, or moving circuit assemblies through process steps. Assembly and SMT equipment sits in the manufacturing flow around board assembly rather than in front-end wafer processing.
How it works
Where it fits in the process flow
Applications
General reference — not yet source-verifiedAssembly and SMT equipment is used for electronics manufacturing workflows that build circuit assemblies on boards. Gate equipment in this class supports material flow within those workflows.
What do the numbers mean?
Vacuum & pumping1
Configuration & options5
- Gate 100cm[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Pressure2-4 Bar[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What category does the Nutek NTM MGL 1000 Gate belong to?
The Nutek NTM MGL 1000 Gate belongs to Assembly / SMT equipment.[2]
What electrical power does the Nutek NTM MGL 1000 Gate use?
Not publicly documented
The following facts about the NTM MGL 1000 Gate are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NTM MGL 1000 Gate are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NTM MGL 1000 Gate are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NTM MGL 1000 Gate are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NTM MGL 1000 Gate are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NTM MGL 1000 Gate is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 10, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
