Mydata
My 300 SX 15
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
The My 300 SX 15 includes a vision system with 4K resolution that resolves component pitches as fine as 0.1 mm and lead widths of 0.05 mm for leaded components.[2]
The machine software used is TPSys 5.3.1d.1 or TYPSYS 5.1.2, with software options including Hydra High Speed, Hydra Large Component Range, and Hydra Fine Pitch.[1][3]
Where it fits in the process flow
The My 300 SX 15 is used in the assembly process for high-mix, low-volume production environments.[2]
Applications
The My 300 SX 15 is applicable for placing components including 01005 chip components using high-speed mount heads.[2]
What do the numbers mean?
Power & electrical2
- Activated software options
- Hydra; Hydra High Speed; Hydra Large Component Range; Hydra Fine Pitch; Electrical Two Pole Test; Electrical Measurement; Fast Place Sequence; Line Mode; Shared Databases; Proactive Replenishment Monitor; In/Out Conveyor Board Train; In/Out Conveyor Fast Board Change[1]
- Options
- Electrical Two-Pole Test; Shared Databases; HYDRA Electrical Measurement; HYDRA High Speed; Fast Place Sequence; HYDRA Large Component Range; HYDRA Fine Pitch; Proactive Replenishment Monitor; In/Out Conveyor Board Train; In/Out Conveyor Fast Board Change[3]
Optics & imaging1
Performance6
Control & software2
Configuration & options13
Observed configurations
How individual machines were equipped when they appeared on the secondary market — as listed, per unit. These describe one specific machine, not the model in general.
Unit as listed[1]
- Midas Head
- Hydra Head
- Software: TPSys 5.3.1d.1
- Hydra
- Hydra High Speed
- Hydra Large Component Range
- Hydra Fine Pitch
- Electrical Two Pole Test
- Electrical Measurement
- Fast Place Sequence
- Line Mode
- Shared Databases
- Proactive Replenishment Monitor
- In/Out Conveyor Board Train
- In/Out Conveyor Fast Board Change
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Juki KE 3010 AL Placement— Same function class: Assembly / SMT, nullCompare in depthsource[4]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Activated software optionsHydra; Hydra High Speed; Hydra Large Component Range; Hydra Fine Pitch; Electrical Two Pole Test; Electrical Measurement; Fast Place Sequence; Line Mode; Shared Databases; Proactive Replenishment Monitor; In/Out Conveyor Board Train; In/Out Conveyor Fast Board Change[1]
- OptionsElectrical Two-Pole Test; Shared Databases; HYDRA Electrical Measurement; HYDRA High Speed; Fast Place Sequence; HYDRA Large Component Range; HYDRA Fine Pitch; Proactive Replenishment Monitor; In/Out Conveyor Board Train; In/Out Conveyor Fast Board Change[3]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What types of components can a pick-and-place machine handle?General reference — not yet source-verified
Such machines can place a wide variety of surface-mount components, including resistors, capacitors, diodes, transistors, QFPs, BGAs, and connectors, as long as the component sizes and packages are within the machine's specified range and the appropriate feeder types are used.
How does the machine ensure placement accuracy?General reference — not yet source-verified
Accuracy is achieved through a combination of mechanical precision in the positioning system and optical vision systems that inspect the component and board before placement. The machine uses fiducial marks on the PCB and component features to correct for any offset or rotation.
What types of feeders are commonly used with these machines?General reference — not yet source-verified
Common feeder types include tape-and-reel feeders for bulk components, tray feeders for larger or delicate parts, tube feeders for certain packages, and sometimes custom or vibratory feeders for odd-form components.
What maintenance is typically required for such machines?General reference — not yet source-verified
Regular maintenance includes cleaning vacuum nozzles, calibrating vision systems, lubricating moving parts, checking and replacing worn belts or other drive components, and ensuring proper alignment of feeders and placement heads to maintain accuracy and reliability.
Not publicly documented
The following facts about the My 300 SX 15 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the My 300 SX 15 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the My 300 SX 15 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the My 300 SX 15 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the My 300 SX 15 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the My 300 SX 15 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]microncorp.com — microncorp.commicroncorp.com
- [3]midwestsmt.com — midwestsmt.commidwestsmt.com
- [4]Equipment inventory listing
Last updated Oct 9, 2026.
Compare with similar tools
View all →
The Juki KE 3010 AL Placement is an Assembly / SMT placement system.
The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
