Lapmaster
96 Continuous
The Lapmaster 96 Continuous Polisher is a continuous polishing machine. The Lapmaster 96 Continuous Polisher requires a 3-phase electrical supply at 60 Hz, 460 V, and 80 A.[1]
What it is
How it works
General reference — not yet source-verifiedA continuous polisher removes small amounts of material by bringing a workpiece into sustained contact with an abrasive surface or polishing medium while the process repeats without discrete batch loading.
A machine in this class is used for controlled planar finishing, surface refinement, and thickness adjustment in precision manufacturing.
Where it fits in the process flow
General reference — not yet source-verifiedA continuous polisher typically sits in a finishing or planarization step after earlier shaping or preparation operations.
A continuous polisher typically feeds downstream inspection, cleaning, or subsequent fabrication steps that require a refined surface condition.
Applications
General reference — not yet source-verifiedA continuous polisher is used for precision surface finishing in manufacturing flows that require flatness, smoothness, or controlled material removal.
A continuous polisher is commonly applied to hard, brittle, or otherwise difficult-to-finish substrates in industrial and semiconductor-related processing.
What do the numbers mean?
Power & electrical9
Configuration & options4
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 96 Continuous are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 96 Continuous are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 96 Continuous are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 96 Continuous are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 96 Continuous are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 96 Continuous is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (6)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]inventory listing
- [4]Equipment inventory listing
- [5]Equipment inventory listing
- [6]Equipment inventory listing
Last updated Oct 11, 2026.
Compare with similar tools
View all →
The Logitech 1 DP 41 is a polisher with 3-phase, 50/60 Hz, 480 V, 12 amp electrical requirements.
The Strasbaugh 100R16 is a 1-spindle grinder/polisher with a DC drive system and 2 motors. The Strasbaugh 100R16 has a 16-inch capacity.
The Lapmaster 12 Benchtop Lapping / Polishing Machine is a bench-mounted single-sided lapping and polishing machine with a 12-inch plate diameter.
