Keysight
M 8190 A Arbitrary Waveform
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
The M 8190 A supports one-channel and two-channel module configurations.[4]
Where it fits in the process flow
The M 8190 A operates inside an AXIe mainframe and uses a personal computer for control.[4]
Applications
What do the numbers mean?
Power & electrical1
Optics & imaging1
Control & software1
Configuration & options9
- 12Gsa/S 14-Bit[1]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| M8190A-001 | — | — | Arbitrary waveform generator module with 1 channel | assets-us-01.kc-usercontent.com[4] |
| M8190A-002 | — | — | Arbitrary waveform generator module with 2 channels | assets-us-01.kc-usercontent.com[4] |
| M8190A-LPN | — | — | Arbitrary waveform generator module with 2 channels and low phase noise | assets-us-01.kc-usercontent.com[4] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Instrument typearbitrary waveform generator[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
How important is the sample rate and resolution of an arbitrary waveform generator?General reference — not yet source-verified
The sample rate determines the maximum frequency content of the output signal, while the resolution (number of bits) affects the amplitude precision and noise floor. For accurate reproduction of high-speed signals, a high sample rate is essential. Higher resolution is important for low-distortion signals and applications requiring fine amplitude control. The choice depends on the specific test requirements.
Can an arbitrary waveform generator be used for functional test of high-speed digital interfaces?General reference — not yet source-verified
Yes, AWGs are commonly used to generate stress signals, jitter, and eye-diagram patterns for testing high-speed serial interfaces such as PCIe, USB, and Ethernet. By creating specific non-ideal waveforms, engineers can evaluate the robustness of receivers and perform compliance testing. However, for pure digital pattern generation, a pattern generator or bit error rate tester may be more appropriate.
Not publicly documented
The following facts about the M 8190 A Arbitrary Waveform are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the M 8190 A Arbitrary Waveform are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the M 8190 A Arbitrary Waveform are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the M 8190 A Arbitrary Waveform are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the M 8190 A Arbitrary Waveform is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the M 8190 A Arbitrary Waveform are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]trsrentelco.comtrsrentelco.com
- [4]assets-us-01.kc-usercontent.com — assets-us-01.kc-usercontent.comassets-us-01.kc-usercontent.com
Last updated Oct 11, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
