Buehler

Ecomet 6

Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Buehler Ecomet 6 is a variable-speed grinder/polisher. The Buehler Ecomet 6 features 8-inch diameter chucks and can reach speeds up to 340 rpm.^[1]

BuehlerEcomet 6

No photo available yet

What it is

The Buehler Ecomet 6 is a variable-speed grinder and polisher.^[3]^[1]^[2]

How it works

General reference — not yet source-verified

A grinder and polisher removes material from a specimen surface by combining a rotating working surface with an abrasive or polishing medium.

Where it fits in the process flow

General reference — not yet source-verified

Grinder and polisher equipment sits in sample preparation before inspection, measurement, or other downstream analysis.

Applications

The Ecomet 6 is used for surface preparation of specimens that need grinding and polishing.^[1]^[2]

The machine is suitable for semiconductor-related lapping, polishing, and grinding work.^[1]

What do the numbers mean?

Power & electrical1

Electrical: 115V 60Hz 15A^[1]

Wafer handling1

Chuck diameter: 8 inches^[1]

Dimensions & facilities2

Dimensions (L x W x H): 30 x 30 x 16 inches^[2]
Weight: 160 lb^[2]

Configuration & options3

Type: Variable speed grinder/polisher^[1]
Max speed: 340 rpm^[1]
Water requirement: Required^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Electrical115V 60Hz 15A^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What type of machine is the Buehler Ecomet 6?

The Buehler Ecomet 6 is a variable-speed grinder and polisher.^[3]^[1]^[2]

What is the Ecomet 6 used for?

The Ecomet 6 is used for lapping, polishing, and grinding work and for specimen surface preparation.^[1]^[2]

Not publicly documented

The following facts about the Ecomet 6 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Ecomet 6 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Ecomet 6 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Ecomet 6 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Ecomet 6 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Ecomet 6 is not on record.
Answerable by: an OEM datasheet or a fab qualification report