Assembleon
Emerald X II
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedA pick and place machine removes components from feeders or trays, positions them with a vision system, and places them onto a printed circuit board with controlled motion.
An SMT placement machine is part of the surface mount assembly flow and is used to automate component loading and placement before solder reflow.
Where it fits in the process flow
General reference — not yet source-verifiedThe Assembleon Emerald X II sits in the SMT assembly line at the component placement stage.
The Emerald X II places parts onto boards after solder paste printing and before reflow soldering.
Why won't it start?
Documented failure modes, common issues, and field considerations.
- This model does not have edge clamping.
What do the numbers mean?
Wafer handling2
- with extended large parts handler[1]
Optics & imaging1
Configuration & options9
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| Emerald X II with extended large parts handler | — | — | Listed as a pick and place with extended large parts handler | Equipment inventory listing[1] |
| Emerald X-II with LCS Tray Feeder (PA131502) | — | — | 2-headed PnP machine with upgraded dual arm tray feeder (LCS); 54mm and 32mm upward-facing cameras; model does not have edge clamping | smtnet.com[3] |
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of machine is the Assembleon Emerald X II?
The Assembleon Emerald X II is an assembly and surface-mount technology pick-and-place machine.[2]
Not publicly documented
The following facts about the Emerald X II are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Emerald X II are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Emerald X II are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the Emerald X II is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Emerald X II are on record.
Answerable by: an OEM parts catalog or a service engineer
No publicly hosted manuals, SOPs, or datasheets for the Emerald X II are on record.
Answerable by: university cleanroom staff or an OEM application specialist
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]smtnet.com — smtnet.comsmtnet.com
Last updated Oct 11, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
