Accretech
UF200A Fully Automatic
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Accretech UF200A is a fully automatic wafer prober for 200 mm wafers. The Accretech UF200A supports various tester interface types and chuck configurations.[1]
What it is
How it works
General reference — not yet source-verifiedAutomatic probers align each die on the wafer with a probe card and lower the chuck to make electrical contact, allowing the tester to measure device parameters.
Where it fits in the process flow
General reference — not yet source-verifiedThe prober positions the wafer for the tester; a separate prober handling system moves wafers to and from the chuck.
Applications
General reference — not yet source-verifiedWafer probing supports characterization, binning, and yield analysis before dicing.
What do the numbers mean?
Wafer handling1
Configuration & options3
Observed configurations
How individual machines were equipped when they appeared on the secondary market — as listed, per unit. These describe one specific machine, not the model in general.
Unit as listed[1]
- 240 V EU voltage setup
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| UF200A COOL | — | — | Includes cold operation capability | fabsurplus.com[1] |
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What voltage setup is used on the UF200A?
The UF200A is configured for 240 V EU voltage with a CE safety mark.[1]
Not publicly documented
The following facts about the UF200A Fully Automatic are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UF200A Fully Automatic are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the UF200A Fully Automatic are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the UF200A Fully Automatic are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the UF200A Fully Automatic is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the UF200A Fully Automatic are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]dealer listingfabsurplus.com
- [2]Accretech UF200A Fully Automatic Prober for sale — fabsurplus.comfabsurplus.com
Last updated Sep 24, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
