Comparison ledger
Exatron PET2, KLA 1007, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | PET2Exatron | 1007KLA |
|---|---|---|
| OEM | Exatron | KLA |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | 1997 | — |
| Production run | 1997– | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Exatron PET2 | KLA 1007 |
| Specifications | ||
| device loading | loaded and unloaded by hand or with an air wand[1] | — |
| device holding | vacuum holds the DUT in a precisely machined Face Plate[1] | — |
| alignment method | device is mechanically aligned by its body, not by its leads[1] | — |
| electrical alignment | face plate is placed onto a corresponding docking plate mounted on a printed circuit board[1] | — |
| output handling | returns the device to the operator after pass/fail, or drops devices into one of two small reject bins[1] | — |
| output tube support | can accommodate a two-tube mount for output tubes[1] | — |
| mounting options | table-top mounted, mounted directly to the test head, or mounted on a FRED (Free Rolling Exatron Dolly)[1] | — |
| power and air requirements | 110/220 VAC; clean, dry air at 80 PSI/5 CFM[1] | — |
| Device type | Semi-automated prototype engineering test fixture[1] | — |
| Supported package types | Tray-borne devices such as QFPs, PQFPs, and TSOPs[1] | — |
| Functions | Device placement, alignment, and test head clamping[1] | — |
| Power requirement | 110/220 VAC[1] | — |
| Air requirement | Clean, dry air at 80 PSI/5 CFM[1] | — |
| Manufacturer | — | KLA[2] |
| Model | — | 1007[2] |
| Description | — | Wafer Prober[2] |
| Wafer size | — | 150 mm[2] |
| Convertible to 8 inch wafer size | — | Yes[2] |
| Vintage | — | 01.06.1995[2] |
| Make | — | KLA[3] |
| Equipment type | — | Prober[3] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →