Comparison ledger
Dek Horizon 03 i, Speedline Accuflex, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Horizon 03 iDek | AccuflexSpeedline |
|---|---|---|
| OEM | Dek | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2003 Document date |
| Control system | — | — |
| Generation | — | — |
| Family | Dek Horizon 03 | Speedline Accuflex |
| Specifications | ||
| Configuration | 50/60 Hz[2] | 220-240 V[4] |
| Board Minimum Size | 40 x 50mm[1] | — |
| Board Maximum Size | 510 x 508mm[1] | — |
| Board Thickness | 0.2mm - 6mm[1] | — |
| Board Maximum Weight | 1Kg[1] | — |
| Underside Component Clearance | Up to 8mm including PCB thickness[1] | — |
| Print Speed | 2mm - 150mm/sec[1] | — |
| Print Pressure | 0 - 20kg[1] | — |
| Print Gap | 0 - 6mm, programmable[1] | — |
| Stencil Separation Speed | 0.1 - 20mm/sec[1] | — |
| Stencil Separation Distance | 0 - 3mm[1] | — |
| Process Capability | 1.33 Cpk @ ±25µm Including Process[1] | — |
| Alignment Cycle Time | 14 secs (12 secs with Speedup)[1] | — |
| Product Changeover | 2 minutes[1] | — |
| New Product Set Up | <10 minutes[1] | — |
| Vision System | Cognex[1] | — |
| Operating System | Windows XP[1] | — |
| Power Supply Voltage | 115 volts +/- 10% at 20 amps or 230 volts +/- 10% at 10 amps, single phase 50/60Hz[1] | — |
| Air Supply | 5 - 8 bar at 5 Litres/min, ISO 8573.1 class 2.3.3[1] | — |
| Operating Temperature | 10 - 35°C (50 - 95°F)[1] | — |
| Operating Humidity | 30 - 70% Relative Humidity (non condensing)[1] | — |
| Weight | 800kg (1760lbs)[1] | — |
| Dimensions (L x W x H) | 2050mm x 1500mm x 1570mm[1] | — |
| Screen Frame Type | DEK 265 (736 x 736 x 38/40mm external, 660 x 660mm internal)[1] | — |
| Screen Frame Standard | 29" x 29" / 26" x 26"[1] | — |
| Stencil Mount Adjustment | Configurable between 29" to 12" in under 2 secs[1] | — |
| Transport Conveyor Max Height | 3mm - 42mm programmable[1] | — |
| Fiducial Size | 0.5mm - 3.0mm[1] | — |
| Certification | CE (98/37/EC, 89/336/EEC, 73/23/EEC, 2003/10/EC)[1] | — |
| Equipment type | Screen printer[3] | — |
| Make | Dek[3] | — |
| Model | Horizon 03 i[3] | — |
| Vintage | 2009[2] | — |
| Power | 50/60 Hz - 230 Volt[2] | 1 KVA[4] |
| Screen frame standard | DEK 265[1] | — |
| External screen frame size | 736 x 736 x 38/40mm[1] | — |
| Internal screen frame size | 660 x 660mm (26" x 26")[1] | — |
| Minimum board size | 40 x 50mm[1] | 75 mm x 50 mm (3" x 2")[7] |
| Maximum board size | 510 x 508mm[1] | 584 mm x 508 mm (23" x 20")[7] |
| Largest Single Load | — | 1 A[4] |
| Full Load Current | — | 3 A[4] |
| Machine type | — | Fully automatic screen/stencil printer[5] |
| Application | — | Deposits print medium on circuit boards to enable application of surface mount components[5] |
| Category | — | Assembly / SMT[6] |
| Frequency | — | 50/60 Hz[4] |
| Board thickness | — | 0.8 mm to 5.0 mm including warpage[7] |
| Optional board thickness | — | 0.2 mm to 3.8 mm including warpage[7] |
| Maximum board weight | — | 4.5 kg (10 lb)[7] |
| Board edge clearance | — | 5 mm (0.19")[7] |
| Optional board edge clearance | — | 3 mm (0.12")[7] |
| Maximum underside clearance | — | 15 mm (0.59")[7] |
| Board support methods | — | Independent, movable, automatic (option) magnetic support pins, dedicated fixturing, GridLok, Gel-Flex[7] |
| Maximum print area | — | 559 mm x 498 mm (22" x 19.6")[7] |
| Snap-off | — | 0.2 mm x 10 mm/sec (0.008" x 0.39"/sec)[7] |
| Print speed | — | 5 mm to 200 mm/sec (0.2" to 7.87"/sec)[7] |
| Print force | — | Up to 20 kg (44 lb)[7] |
| Print stroke | — | 508 mm (20")[7] |
| Stencil frame size | — | 737 mm x 737 mm (29" x 29")[7] |
| Vision field-of-view | — | 13 mm x 10 mm[7] |
| Vision system | — | Single camera with patented look up/down vision with Cognex 8100 vision system[7] |
| Vision alignment | — | ±25 microns (±0.001") repeatability & accuracy at 6 Sigma, Cp greater than or equal to 2.0[7] |
| Print deposit repeatability | — | ±50 microns (±0.002") at 6 Sigma, Cp greater than or equal to 2.0[7] |
| Cycle time | — | Standard single-rail conveyor system 11.5 sec; optional triple-track conveyor system 10.0 sec[7] |
| Air supply requirements | — | 5 CFM at 90 psi, clean air supply, 1421/m @ 6.2 bar[7] |
| Height | — | 1575 mm (62")[7] |
| Depth | — | 1448 mm (57")[7] |
| Conveyor width | — | 1314 mm (51.7")[7] |
| Cover width | — | 1200 mm (47.25")[7] |
| Front clearance | — | 679 mm (26.75") minimum[7] |
| Rear clearance | — | 240 mm (9.45")[7] |
| Machine weight | — | 700 kg (1550 lb)[7] |
| Crated weight | — | 1140 kg (2500 lb)[7] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →