Comparison ledger
Bruker contour-R1, JDSU 1205-1, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | contour-R1Bruker | 1205-1JDSU |
|---|---|---|
| OEM | Bruker | JDSU |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Bruker contour-R1 | JDSU 1205-1 |
| Specifications | ||
| Equipment type | Optical Profiler[1] | — |
| Equipment identifier | Inert-BRUKER-contour-R1[1] | — |
| Measurement principle | Optical (non-contact) 3D surface characterization; uses interference microscopy[2] | — |
| Vertical resolution (VSI mode) | ~3 nm[2] | — |
| Vertical resolution (PSI mode) | <0.1 nm[2] | — |
| Max. sample height | 100 mm[2] | — |
| Max. sample diameter | 150 mm[2] | — |
| Max. single measurement area | 1.0 mm x 1.0 mm (with stitching for larger areas)[2] | — |
| Measurement modes | Vertical Scanning Interferometry (VSI) and Phase Shifting Interferometry (PSI)[2] | — |
| Objectives | 10X and 50X on a software controlled motorized turret[2] | — |
| Field of view (FOV) lens | 0.55X and 2X[2] | — |
| Stage type | Motorized X-Y stage[2] | — |
| Software | Vision64 for automation and analysis[2] | — |
| Additional capabilities | Stitching algorithm for combining multiple images; handles rough surfaces, abrupt steps, slopes >60°, and low reflectance <0.5%[2] | — |
| Vendor | Bruker[2] | — |
| Model | Contour Elite I 3D optical metrology system[2] | 1205-1[3] |
| Purpose | Optical (non-contact) 3D surface characterization of a wide range of substrates and devices[2] | — |
| Description | Optical profiler capable of generating three dimensional surface scans of a wide range of materials and devices[2] | — |
| Stage | Motorized X-Y stage positioning[2] | — |
| Maximum sample size | 150 mm diameter[2] | — |
| Maximum sample height | 100 mm[2] | — |
| FOV lenses | 0.55X and 2X[2] | — |
| Manufacturer | — | JDSU[3] |
| Category | — | Fiber Optic Equipment[3] |
| Condition | — | Used[3] |
| Output Power | — | 0.5mW - 0.8mW[4] |
| Input Voltage | — | 115V[4] |
| Input Current | — | 0.12A[4] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →