Comparison ledger
SUSS MicroTec 150 e Mask, SUSS MicroTec MJB 4 Mask, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 150 e MaskSUSS MicroTec | MJB 4 MaskSUSS MicroTec |
|---|---|---|
| OEM | SUSS MicroTec | SUSS MicroTec |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | SUSS MicroTec 150 e Mask | SUSS MicroTec MJB |
| Specifications | ||
| Configuration | — | Front side Alignment[1] |
| Trinocular Split Field Microscope | — | Dual 5X & 10X Objectives[1] |
| OEM | — | SUSS MicroTec[2] |
| Model | — | MJB 4[3] |
| Exposure types | — | vacuum, hard, soft proximity contact[2] |
| Substrate size (max) | — | 4 inches in diameter[2] |
| Mask/substrate thickness capacity | — | 9.00 mm total[2] |
| Exposure optics | — | 400 nm[2] |
| Lamps | — | allowing sub-micron exposure in vacuum contact[2] |
| Photoresist tones | — | positive and negative[2] |
| Alignment type | — | topside only[2] |
| Minimum alignment mark separation (binocular) | — | 3.5 cm[2] |
| Typical pattern resolution | — | 1 µm[2] |
| Achievable alignment resolution | — | 1 µm[2] |
| Wafer sizes | — | 2, 3, 4, 12 inch[1] |
| Alignment features (as listed by reseller) | — | front side alignment; trinocular split field microscope with dual 5X & 10X objectives; video camera; high resolution alignment; Suss power supply[1] |
| Contact exposure modes | — | vacuum, hard, soft, proximity contact[2] |
| Substrate size | — | up to 4 inches in diameter[2] |
| Maximum mask and wafer total thickness | — | 9.00 mm[2] |
| Adjustment accuracy (X, Y, theta) | — | below 1 µm[2] |
| Exposure optics wavelength | — | 400 nm[2] |
| Topside alignment | — | yes[2] |
| Wafer sizes (listing) | — | 2, 3, 4, 12 inch[1] |
| Alignment type (listing) | — | Front side[1] |
| Microscope | — | Trinocular Split Field with Dual 5X & 10X Objectives[1] |
| Camera | — | Video Camera[1] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →