Comparison ledger
Kurt Lesker 150LX, Temescal Simba2, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 150LXKurt Lesker | Simba2Temescal |
|---|---|---|
| OEM | Kurt Lesker | Temescal |
| Category | Deposition | Deposition |
| Wafer size | 150mm | 150mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Kurt Lesker 150LX | Temescal Simba2 |
| Specifications | ||
| OEM | Kurt Lesker[1] | — |
| Model | ALD-150LX[1] | — |
| Type | Plasma-enhanced atomic layer deposition (PE-ALD) system[1] | — |
| Location | Cleanroom[1] | — |
| Operating mode | Load-locked system[1] | — |
| In situ metrology | Film Sense FS-1 Multi-Wavelength ellipsometer[1] | — |
| Wafer size | Up to full 150 mm (6") wafers[1] | — |
| Process | Plasma-enhanced atomic layer deposition (PE-ALD)[1] | — |
| Substrate size | Up to 150mm[2] | — |
| Substrate heating | Up to 600°C[2] | — |
| Load lock | Load-locked system[1] | — |
| ALD process modes | Plasma Enhanced, Thermal only, Dynamic and Static Exposure for HAR, Variable Residence Mode (VRM)[2] | — |
| Ellipsometry | Standard on chamber[2] | — |
| Precursor inlets to chamber | Four (4), standard on chamber, independently heated[2] | — |
| Precursor sources | Up to twelve (12)[3] | — |
| Precursor types | Up to fourteen (14)[2] | — |
| Plasma source | 1 kW RF remote ICP[4] | — |
| Process type | Plasma-enhanced atomic layer deposition (PE-ALD)[1] | — |
| Substrate temperature | Up to 600°C[2] | — |
| Process modes | Plasma enhanced, thermal only, dynamic and static exposure for HAR, variable residence mode (VRM)[2] | — |
| Ellipsometry ports | Standard on chamber[2] | — |
| Precursor inlets | Four standard on chamber, independently heated[2] | — |
| Precursor capacity | Up to fourteen vapor draw flow through, bubbler, ozone pulsed gas plasma process gases[2] | — |
| Substrate handling | Load locked single wafer transfer[4] | — |
| Process gases | Argon, oxygen, nitrogen, hydrogen, ammonia, ozone[4] | — |
| Power supply | — | 15-kW Temescal Simba2[5] |
| System association | — | Listed as an upgrade option for FC-4400[5] |
| Power rating | — | 15 kW[8] |
| Product type | — | Power supply[9] |
| Function | — | E-beam power supply[10] |
| Associated systems | — | FC-4400, UEFC-5700, FC/BCD-2800[11] |
| Manufacturer | — | Temescal[9] |
Plan your fab
Building a Deposition process? Get a complete equipment list.
Open the fab equipment planner →