Comparison ledger
Electroglas 1034, Tektronix P 6139 A, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1034Electroglas | P 6139 ATektronix |
|---|---|---|
| OEM | Electroglas | Tektronix |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Electroglas 1034 | Tektronix P 6139 A |
| Specifications | ||
| Type | — | 10X passive probe[1] |
| Use | — | Designed for use with Tektronix TDS3000 and TDS500 Series digitizing oscilloscopes[1] |
| Cable length | — | 1.3 meter[1] |
| Compatibility | — | Compatible with the Tektronix family of compact size (3.5 mm) probe accessories[1] |
| Attenuation | — | 10X ±0.5% at DC[1] |
| Input resistance | — | 10 MΩ ±0.5%[1] |
| Input capacitance | — | 8.0 pF (±0.8 pF)[1] |
| Compensation range | — | 8 pF to 18 pF[1] |
| System bandwidth | — | 500 MHz (TDS3054) or TDS500 series; 100 MHz (TDS3012)[1] |
| Maximum input voltage | — | 400 V RMS CAT I or 400 V DC CAT I; 300 V RMS CAT II or 300 V DC CAT II; 150 V RMS CAT III or 150 V DC CAT III; 590 V peak, <50% DF, <1 sec PW; 930 V peak, <20% DF, <1 sec PW; 1250 V peak, <10% DF, <50 usec PW[1] |
| Net weight including accessories | — | <110 g (0.24 lb)[1] |
| Operating temperature range | — | -15 C to +65 C (+5 F to +149 F)[1] |
| Nonoperating temperature range | — | -62 C to +85 C (-80 F to +185 F)[1] |
| Humidity | — | Five cycles (120 hr) at 95% to 97% relative humidity[1] |
| Altitude | — | < 2000 meters[1] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →