Comparison ledger
Electroglas 1034, JDSU SC Series, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1034Electroglas | SC SeriesJDSU |
|---|---|---|
| OEM | Electroglas | JDSU |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Electroglas 1034 | JDSU SC Series |
| Cited variants | — | |
| Specifications | ||
| Type | — | Programmable fiberoptic switch[1] |
| Architecture | — | 1xN switch[1] |
| Channel capacity | — | Up to 180 output channels[1] |
| Versions | — | Single-mode and multimode versions available[1] |
| Interfaces | — | IEEE 488.1 parallel interface and RS232C serial interface[1] |
| Typical insertion loss | — | 0.4 dB[1] |
| Typical repeatability | — | 0.003 dB[1] |
| Typical return loss | — | Greater than 65 dB[1] |
| Applications | — | Fiberoptic component testing, transmitter/receiver measurement, research and development[1] |
| RS232 data protocol | — | 1200 baud, ASCII, 8 bits per character, 1 stop bit, no parity[1] |
| Drivers | — | Eight open collector outputs[1] |
| Driver current | — | 100 mA maximum per output[1] |
| Input voltage | — | 110/115/230/240V AC, 50 to 60 Hz[1] |
| Power consumption | — | 100 VA maximum[1] |
| Operating temperature | — | 0 to 55 °C[1] |
| Storage temperature | — | -40 to 70 °C[1] |
| Humidity | — | Maximum 95% RH from 0 to 55 °C[1] |
| Weight | — | Single-height 9 kg; double-height 14 kg[1] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →