Comparison ledger
Cascade Microtech TFO-10, Heller 1088, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | TFO-10Cascade Microtech | 1088Heller |
|---|---|---|
| OEM | Cascade Microtech | Heller |
| Category | Thermal / Diffusion | Thermal / Diffusion |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Cascade Microtech TFO-10 | Heller 1088 |
| Specifications | ||
| Capacity | 10.6 cu.ft. (300 liters)[1] | — |
| Interior Dimensions (W x D x H) | 29.8 x 20.6 x 30.0 inches (757 x 524 x 762 mm)[1] | — |
| Exterior Dimensions (W x D x H) | 44.1 x 29.9 x 56.8 inches (1121 x 760 x 1442 mm)[1] | — |
| Unit Weight | 357 lb (162.8 kg)[1] | — |
| Shipping Weight | 449 lb (204 kg)[1] | — |
| Shelves | 3 standard, 8 maximum[1] | — |
| Access Port | 3 inches[1] | — |
| Warranty | 2-Year Limited Warranty[1] | — |
| Electrical | 220V-240V, 50/60Hz, 1 phase, 26 amps[2] | — |
| Temperature Range | 15°C above ambient to 306°C[1] | — |
| Heat-Up Time to 150°C | 14 minutes (from ambient 25°C)[2] | — |
| Recovery Time after 30 sec Door Opening at 150°C | 3 minutes[1] | — |
| Temperature Uniformity at 150°C | 2.5°C[1] | — |
| Flow Rate | 51 CFM[1] | — |
| Safety Certifications | TÜV SÜD America: Canada CSA 61010-1, USA UL 61010-1, EU EN 61010-1, CE[1] | — |
| Temperature Uniformity at 80°C | 1.5°C[2] | — |
| Temperature Uniformity at 306°C | 5.5°C[2] | — |
| Temperature Stability at 80°C | ±0.2°C[2] | — |
| Temperature Stability at 150°C | ±0.3°C[2] | — |
| Temperature Stability at 306°C | ±0.4°C[2] | — |
| Heat-Up Time to 80°C | 6 minutes (from ambient 25°C)[2] | — |
| Heat-Up Time to 306°C | 31 minutes (from ambient 25°C)[2] | — |
| Recovery Time after 30 sec Door Opening at 80°C | 3 minutes[2] | — |
| Recovery Time after 30 sec Door Opening at 306°C | 6 minutes[2] | — |
| Recovery Time after 60 sec Door Opening at 150°C | 6 minutes[2] | — |
| Shelf Capacity per Shelf | 75 lb (34 kg)[2] | — |
| Shelf Capacity Total | 225 lb (102 kg)[2] | — |
| Air Flow Across Shelf Space | 144 linear feet per minute (43.9 meters per minute)[2] | — |
| Air Changes per Hour at 80°C | 304[2] | — |
| Model | TFO-10[3] | — |
| Type | forced air-drying oven[1] | — |
| Interior dimensions | 29.8 x 20.6 x 30.0 in (757 x 524 x 762 mm)[1] | — |
| Exterior dimensions | 44.1 x 29.9 x 56.8 in (1121 x 760 x 1442 mm)[1] | — |
| Access port | 3 in[1] | — |
| Voltage | 220V-240V[1] | — |
| Phase | 1Ø[1] | — |
| Frequency | 50/60Hz[1] | — |
| Amperage | 26 A[1] | — |
| Temperature range | ambient +15°C to 306°C[1] | — |
| Heat-up time to 80°C from ambient (25°C) | 6 minutes[2] | — |
| Heat-up time to 150°C from ambient (25°C) | 14 minutes[2] | — |
| Heat-up time to 306°C from ambient (25°C) | 31 minutes[2] | — |
| Heating Zones | — | 8 zones (4 top and 4 below) plus 1 cooling zone[4] |
| Heating Method | — | Forced convection[4] |
| Conveyor Width | — | 18 inches (45 cm)[4] |
| Heated Length | — | 43.5 inches (111 cm)[4] |
| Overall Length | — | 96 inches (244 cm)[4] |
| Height | — | 50 inches (127 cm)[4] |
| Net Weight | — | 900 lbs (409 kg)[4] |
| Thermal Profiler | — | Included[4] |
| Oven Top | — | Counter balance for easy access to conveyor[4] |
| Solder Compatibility | — | Lead-free and leaded soldering[4] |
Plan your fab
Building a Thermal / Diffusion process? Get a complete equipment list.
Open the fab equipment planner →