Comparison ledger
Applied Materials 0720 06060 Part, JDSU T BERD 8000 Network Test Platform, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0720 06060 PartApplied Materials | |
|---|---|---|
| OEM | Applied Materials | JDSU |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0720 06060 Part | JDSU T BERD 8000 Network Test Platform |
| Specifications | ||
| Configuration | Contact Pin 24-20 Awg Crimp Gold Flash[1] | — |
| Make | — | JDSU[2] |
| Model | — | T BERD 8000[2] |
| Platform | — | Portable optical network tester[3] |
| Modules | — | Interchangeable modules[3] |
| Testing functions | — | OTDR, chromatic dispersion, polarization mode dispersion, attenuation profile, loss, CWDM/DWDM[3] |
| Transport testing | — | PDH/T-Carrier and SDH/SONET testing up to 10 Gb/s[3] |
| Ethernet testing | — | 10/100/1GigE/10GigE LAN & WAN up to the IP layer[3] |
| DWDM analyzer wavelength range | — | 1250 nm to 1650 nm[3] |
| Transport module weight | — | <15.4 lbs (7 kg) with platform[3] |
| Mainframe display | — | TFT color, 10.4 inches, LCD 800 × 600[4] |
| Mainframe storage | — | Internal memory 16 MB; hard disk optional min 20 GB; floppy disk drive optional 3.5 inches; CD read/write optional[4] |
| Interfaces | — | RS232C, 2 × USB, VGA, RJ45 Ethernet, RJ11 modem optional[4] |
| Power supply | — | Standard removable Li-Ion batteries; up to 16 OTDR hours with two batteries and standard display[4] |
| Size | — | Mainframe only 320 × 265 × 55 mm; mainframe + receptacle + battery pack 320 × 265 × 116 mm[4] |
| Weight | — | Mainframe only 2.9 kg; mainframe + receptacle + battery pack 5.4 kg with one battery[4] |
| Display | — | TFT color, 10.4 inches, LCD 800 × 600[4] |
| Input/output interfaces | — | RS232C, 2 × USB, VGA, RJ45 Ethernet, RJ11 modem optional[4] |
| Battery type | — | standard removable Li-Ion batteries[4] |
| Operation time | — | up to 16 OTDR hours with two batteries and standard display[4] |
| Size (mainframe only) | — | 320 × 265 × 55 mm[4] |
| Weight (mainframe only) | — | 2.9 kg[4] |
| OTDR module central wavelength | — | 850/1300 nm, 1310/1550 nm, or 1310/1550/1625 nm depending on module[4] |
| Transport module interfaces | — | DS1, E1, E3, DS3, E4, STS-1, STM-1e, 155M/622M/2.5G/10G, 10/100/1000 Mb/s electrical, 1 GigE optical, and 10GigE LAN + WAN[4] |
| Launch fiber module length | — | 2 km or 4 km[4] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →