Comparison ledger
Applied Materials 0020 34833 Part, Neslab HX 500 Chiller, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0020 34833 PartApplied Materials | HX 500 ChillerNeslab |
|---|---|---|
| OEM | Applied Materials | Neslab |
| Category | Lab & Support Equipment | Lab & Support Equipment |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0020 34833 Part | Neslab HX 500 Chiller |
| Specifications | ||
| Configuration | Block Cont Mount H / V Interlock[1] | 440-480V[2] |
| Pump Type | — | CP-55[2] |
| Controller | — | Digital, non bath[2] |
| Frequency | — | 60Hz[2] |
| Phase | — | 3 Phase[2] |
| Refrigerant | — | R-22[2] |
| Make | — | Neslab[2] |
| Model | — | HX 500[2] |
| Power | — | 440-480V[2] |
| Temperature range | — | 5°C to 35°C[3] |
| Stability | — | ± 0.1°C[3] |
| Condenser | — | air or water cooled[3] |
| Reservoir size | — | 28 gallons / 106 liters[3] |
| Cooling capacity at 60 Hz and 20°C | — | 15,700 watts[3] |
| Cooling capacity at 50 Hz and 20°C | — | 13,030 watts[3] |
| Pump performance at 60 Hz, Pump 1 | — | 23 gpm at 50 psig (TU 9)[3] |
| Pump performance at 60 Hz, Pump 2 | — | 19 gpm at 50 psig (CP 75)[3] |
| Pump performance at 50 Hz, Pump 1 | — | 16 gpm at 50 psig (TU 9)[3] |
| Pump performance at 50 Hz, Pump 2 | — | 10 gpm at 40 psig (CP 75)[3] |
| Power requirements at 60 Hz | — | 208-230V 3ø / 460V 3ø[3] |
| Power requirements at 50 Hz | — | 380-415V 3ø[3] |
| Unit dimensions (H x W x D) | — | 51.625 x 46 x 28.75 in / 131.1 x 116.8 x 73 cm[3] |
| Plumbing connections, inlet/outlet process | — | 1 in. FNPT[3] |
| Plumbing connections, inlet/outlet facility | — | 1 in. FNPT[3] |
| Plumbing connection, drain | — | 1/2 in. FNPT[3] |
| Plumbing connection, auto refill | — | 3/8 in. OD SS barb[3] |
| Unit weight | — | 746 lb / 338.4 kg[3] |
| Applications | — | Lasers, process cooling, MRI, medical lasers, linear accelerators, diffusion pumps, vacuum systems, plasma etch equipment[4] |
| Equipment type | — | Environmental[5] |
| Cooling type | — | Water cooled chiller[5] |
Plan your fab
Building a Lab & Support Equipment process? Get a complete equipment list.
Open the fab equipment planner →