Comparison ledger
Agilent 11980 A, Optorun OTFC 1550 Optical, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 11980 AAgilent | OTFC 1550 OpticalOptorun |
|---|---|---|
| OEM | Agilent | Optorun |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Agilent 11980 A | Optorun OTFC 1550 Optical |
| Cited variants | — | |
| Specifications | ||
| Wavelength Range | 1250-1600 nm[3] | — |
| Model | — | OTFC 1550[4] |
| Make | — | Optorun[4] |
| Vintage | — | 2011[4] |
| Category | — | Precision Optics[5] |
| Series | — | OTFC series[1] |
| Description | — | optical coater / optical thin film coater[4] |
| Application | — | producing AR coatings and optical filters such as edge filters and band pass filters[1] |
| Vacuum chamber size | — | SUS304, φ1550mm×1800mm (H)[1] |
| Substrate dome size | — | φ1400mm[1] |
| Substrate dome rotation speed | — | 10 rpm to 30 rpm (Variable)[1] |
| Optical film thickness control system | — | HOM2-R-VIS350A High-precision Optical Monitor[1] |
| Optical monitor wavelength range | — | 350nm to 1100nm[1] |
| Crystal film thickness monitor | — | XTC/3 plus 6-point rotary sensor[1] |
| Evaporation source | — | EB source: 2 units[1] |
| Ion source | — | 17 cm RF ion source[1] |
| Ultimate pressure | — | 7.0×10^-5 Pa or lower[1] |
| Pump down rate | — | 15 minutes (Atm. to 1.3×10^-3 Pa)[1] |
| Substrate heater | — | 350℃ (max.)[1] |
| Power requirements | — | 3-phase, 200V, 50/60Hz, 120kVA approx.[1] |
| Cooling water flow rate | — | 180ℓ/min or greater[1] |
| Compressed air pressure | — | 0.5MPa or greater[1] |
| Gross weight | — | 10000kg approx.[1] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →